PRINCE AGRI SYSTEMS
Dimensions
Dimensions and working pressure of UPVC Pipes for Agriculture and potable water supply (As per IS 4985-2000 Amendment April 2007)
Nominal
Outside
Diameter |
Mean Outside Diameter |
Wall Thickness (mm) |
Class-1 0.25 MPa (2.5 Kg/Cm²) |
Class-2 0.40 MPa (4.0 Kg/Cm²) |
Class-3 0.60 MPa (6.0 Kg/Cm²) |
Class-4 0.80 MPa (8.0 Kg/Cm²) |
Class-5 1.0 MPa (10.0 Kg/Cm²) |
Class-6 1.25 MPa (12.5 Kg/Cm²) |
| Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
| 20 |
20.0 |
20.3 |
- |
- |
- |
- |
- |
- |
- |
- |
1.1 |
1.5 |
1.4 |
1.8 |
| 25 |
25.0 |
25.3 |
- |
- |
- |
- |
- |
- |
1.2 |
1.6 |
1.4 |
1.8 |
1.7 |
2.1 |
| 32 |
32.0 |
32.3 |
- |
- |
- |
- |
- |
- |
1.5 |
1.9 |
1.8 |
2.2 |
2.2 |
2.7 |
| 40 |
40.0 |
40.3 |
- |
- |
- |
- |
1.4 |
1.8 |
1.8 |
2.2 |
2.2 |
2.7 |
2.8 |
3.3 |
| 50 |
50.0 |
50.3 |
- |
- |
- |
- |
1.7 |
2.1 |
2.3 |
2.8 |
2.8 |
3.3 |
3.4 |
4.0 |
| 63 |
63.0 |
63.3 |
- |
- |
1.5 |
1.9 |
2.2 |
2.7 |
2.8 |
3.3 |
3.5 |
4.1 |
4.3 |
5.0 |
| 75 |
75.0 |
75.3 |
- |
- |
1.8 |
2.2 |
2.6 |
3.1 |
3.4 |
4.0 |
4.2 |
4.9 |
5.1 |
5.9 |
| 90 |
90.0 |
90.3 |
1.3 |
1.7 |
2.1 |
2.6 |
3.1 |
3.7 |
4.0 |
4.6 |
5.0 |
5.7 |
6.1 |
7.1 |
| 110 |
110.0 |
110.4 |
1.6 |
2.0 |
2.5 |
3.0 |
3.7 |
4.3 |
4.9 |
5.6 |
6.1 |
7.1 |
7.5 |
8.7 |
| 125 |
125.0 |
125.4 |
1.8 |
2.2 |
2.9 |
3.4 |
4.3 |
5.0 |
5.6 |
6.4 |
6.9 |
8.0 |
8.5 |
9.8 |
| 140 |
140.0 |
140.5 |
2.0 |
2.4 |
3.2 |
3.8 |
4.8 |
5.5 |
6.3 |
7.3 |
7.7 |
8.9 |
9.5 |
11.0 |
| 160 |
160.0 |
160.5 |
2.3 |
2.8 |
3.7 |
4.3 |
5.4 |
6.2 |
7.2 |
8.3 |
8.8 |
10.2 |
10.9 |
12.6 |
| 180 |
180.0 |
180.6 |
2.6 |
3.1 |
4.2 |
4.9 |
6.1 |
7.1 |
8.0 |
9.2 |
9.9 |
11.4 |
12.2 |
14.1 |
| 200 |
200.0 |
200.6 |
2.9 |
3.4 |
4.6 |
5.3 |
6.8 |
7.9 |
8.9 |
10.3 |
11.0 |
12.7 |
13.6 |
15.7 |
| 225 |
225.0 |
225.7 |
3.3 |
3.9 |
5.2 |
6.0 |
7.6 |
8.8 |
10.0 |
11.5 |
12.4 |
14.3 |
15.3 |
17.6 |
| 250 |
250.0 |
250.8 |
3.6 |
4.2 |
5.7 |
6.5 |
8.5 |
9.8 |
11.2 |
12.9 |
13.8 |
15.9 |
17.0 |
19.6 |
| 280 |
280.0 |
280.9 |
4.1 |
4.8 |
6.4 |
7.4 |
9.5 |
11.0 |
12.5 |
14.4 |
15.4 |
17.8 |
19.0 |
21.9 |
| 315 |
315.0 |
316.0 |
4.6 |
5.3 |
7.2 |
8.3 |
10.7 |
12.4 |
14.0 |
16.1 |
17.3 |
19.9 |
21.4 |
24.7 |
Note: The wall thickness of pipes is based on a safe working stress of 8.6 MPa at 27°C and the working pressure gets reduced at sustained higher
| Coupler |
20mm, 25mm, 32mm,
40mm, 50mm,
63mm,
75mm, 90mm, 110mm,
315mm |
 |
Male Threaded
Adopter |
20mm, 25mm, 32mm, 40mm,
50mm,
63mm, 75mm, 90mm,
110mm, 140mm, 160mm |
 |
| Elbow 90° |
Heavy - 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 180mm, 63mm LW 75mm LW, 90mm LW, 110mm LW, 140mm LW, 200mm LW, 250mm LW |
 |
Female Threaded
Adopter | 20mm, 25mm, 32mm,
40mm, 50mm,
63mm,
75mm, 90mm, 110mm |
 |
| Single Tee |
Heavy - 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 180mm, 63mm LW 75mm LW, 90mm LW, 110mm LW, 140mm LW, 200mm LW, 250mm LW |
 |
End Cap |
20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, 180mm, 225mm |
 |
End Cap
Threaded |
20mm, 25mm, 32mm,
40mm, 50mm, 63mm,
75mm, 90mm, 110mm, 140mm, 160mm |
 |
Ball value system |
½”, ¾”, 1”, 1¼”, 1½”,2”,2½”, 3”, 4” |
 |
| Reducing Bush |
25 X 20 mm,
32 X 20 mm,
32 X 25 mm,
40 X 32 mm,
50 X 40 mm,
63 X 40 mm,
63 X 50mm,
75 X 63 mm,
90 X 75 mm, 110 X 90 mm,
110 X 63mm
|
 |
Reducer |
25 X 20 mm,
32 X 20 mm,
32 X 25 mm,
40 X 32 mm,
50 X 32 mm,
50 X 40 mm,
63 X 40 mm,
63 X 50 mm,
75 X 50 mm,
75 X 63 mm,
90 X 63 mm,
90 X 75 mm,
110 X 63 mm,
110 X 75 mm,
110 X 90 mm,
140 X 90 mm,
140 X 110mm, 160 X 110 mm, 160 X 140 mm, 180 X 160 mm, 200 X 160 mm |
 |
Jointing Methods
Precaution to be taken during installation:
- Use Non Return Valve for water rising system.
- Use coupler if the length is too long. It is helpful for maintenance.
- Use proper adopter when uPVC System joint with other GI/CI system
- Provide proper support at all joints
|
